Cant Get Ardell Heated Eyelash Curler To Turn On?

As a beauty enthusiast, we all know how important it is to have perfectly curled lashes to complete our makeup look. However, if you’re struggling to get your Ardell Heated Eyelash Curler to turn on, it can be a frustrating experience. You may be wondering if you’re doing something wrong or if there’s a defect with your product. Fear not, as a seasoned beauty writer, I’m here to help you troubleshoot the issue and get your Ardell Heated Eyelash Curler working in no time.

Firstly, it’s important to check the batteries. Ensure that they are inserted correctly and that they have enough charge. If the batteries are old or weak, this may be the reason why your curler is not heating up. You may also want to check the power button to make sure it’s fully pressed down. If none of these solutions work, there may be a problem with the heating element, and you should contact Ardell’s customer service for further assistance. With these tips in mind, you’ll be on your way to achieving beautiful, curled lashes effortlessly.

Cant Get Ardell Heated Eyelash Curler to Turn on?

Can’t Get Ardell Heated Eyelash Curler to Turn On?

Check the Battery

One of the most common reasons for an Ardell Heated Eyelash Curler not turning on is due to a dead battery. The curler requires a single AAA battery to operate. Make sure that the battery is inserted correctly and that it has not run out of power. If you have already used the curler for a while, you might need to replace the battery with a new one.

You can also try cleaning the battery compartment with a cotton swab and rubbing alcohol. Sometimes, dirt or debris can accumulate in the battery compartment, preventing the battery from making proper contact with the curler.

Check the On/Off Button

The Ardell Heated Eyelash Curler features an on/off button that activates the heating element. Make sure that you press the button firmly and hold it for a few seconds until the LED light turns on. If the LED light does not turn on, the button might be faulty or stuck. Try pressing it multiple times to see if it makes any difference.

If the button still does not work, you might need to disassemble the curler and check the wiring. Keep in mind that this can be a complicated and risky process, and you might void the warranty if you attempt it. It’s best to contact Ardell customer service for assistance or consider buying a new curler.

You Can Read:  How To Remove Ardell Eyelash Glue?

Check the Heating Element

If the battery and on/off button are working correctly, but the Ardell Heated Eyelash Curler still does not turn on, the heating element might be damaged or malfunctioning. The heating element is responsible for providing the curler with the necessary heat to curl your lashes.

You can try checking the heating element with a multimeter to see if it’s getting any power. However, this can be a complicated process that requires some technical knowledge. If you’re not comfortable doing it yourself, contact Ardell customer service for assistance. They might be able to provide you with a replacement heating element or a new curler.

Benefits of Using the Ardell Heated Eyelash Curler

  • The Ardell Heated Eyelash Curler is designed to give you long-lasting and dramatic curls that enhance your natural lashes.
  • The curler features a unique comb design that separates and curls your lashes without clumping or pulling.
  • The heating element provides gentle and even heat that does not damage your lashes or cause discomfort.
  • The curler is easy to use and can be used on both upper and lower lashes.

Ardell Heated Eyelash Curler Vs. Traditional Eyelash Curlers

Ardell Heated Eyelash Curler Traditional Eyelash Curler
Method Heated curling with comb design Manual curling with clamp design
Effectiveness Long-lasting and dramatic curls Short-term and less defined curls
Comfort level Gentle and even heating, no pinching or pulling Potential for pinching, pulling, or discomfort
Convenience Easy to use and can be used on both upper and lower lashes Requires some skill and practice, can only be used on upper lashes

In conclusion, if you can’t get your Ardell Heated Eyelash Curler to turn on, start by checking the battery, on/off button, and heating element. If none of these solutions work, contact Ardell customer service or consider buying a new curler. The Ardell Heated Eyelash Curler offers unique benefits compared to traditional eyelash curlers, such as long-lasting and dramatic curls, gentle and even heating, and ease of use.

Frequently Asked Questions

Here are some commonly asked questions about the Ardell Heated Eyelash Curler:

You Can Read:  How To Get Ardell Eyelash Glue Off?

Why won’t my Ardell Heated Eyelash Curler turn on?

If your Ardell Heated Eyelash Curler won’t turn on, the first thing to check is the battery. Make sure it is properly inserted and has enough power. If the battery is not the issue, try pressing the button for a few seconds to see if it turns on. If it still doesn’t work, check for any visible damage or loose connections. If you still can’t get it to turn on, contact customer service for further assistance.

It’s also important to note that the Ardell Heated Eyelash Curler may take up to 30 seconds to heat up once turned on, so be patient and wait for the indicator light to turn on before trying to use it.

How do I use the Ardell Heated Eyelash Curler?

Using the Ardell Heated Eyelash Curler is simple. First, make sure your eyelashes are clean and dry. Then, turn on the curler and wait for it to heat up. Once it’s ready, place the curler at the base of your lashes and hold it there for a few seconds. Then, move the curler up towards the tips of your lashes, gently pressing and holding as you go. Repeat on the other eye, and you’re done!

It’s important to be gentle when using the curler and to avoid pressing too hard, as this can damage your lashes. You should also avoid using the curler on wet or damp lashes, as this can cause them to stick to the curler and potentially pull them out.

How do I clean my Ardell Heated Eyelash Curler?

To clean your Ardell Heated Eyelash Curler, first make sure it is turned off and the battery is removed. Then, use a clean, damp cloth to gently wipe down the curler, being careful not to get any water inside the device. You can also use a cotton swab dipped in rubbing alcohol to clean the curler, but again, be careful not to get any inside the device. Allow the curler to air dry completely before using it again.

It’s important to clean your Ardell Heated Eyelash Curler after each use to prevent any buildup of mascara or other products, which can cause the curler to become less effective over time.

Can I use the Ardell Heated Eyelash Curler with mascara?

Yes, you can use the Ardell Heated Eyelash Curler with mascara, but it’s important to apply the mascara after using the curler, not before. Applying mascara before using the curler can cause your lashes to stick to the device and potentially pull them out. Instead, curl your lashes first, and then apply your mascara as usual.

You Can Read:  How To Apply Ardell Diy Eyelash Extensions?

It’s also important to note that using the Ardell Heated Eyelash Curler with mascara may cause the curler to become dirty more quickly, so be sure to clean it after each use.

How long will the battery last in my Ardell Heated Eyelash Curler?

The battery life of the Ardell Heated Eyelash Curler can vary depending on usage, but on average, the battery should last for several uses before needing to be replaced. It’s important to remove the battery when not in use to help preserve its lifespan. When it’s time to replace the battery, be sure to use the correct type and follow the manufacturer’s instructions for inserting it properly.

If you find that the battery in your Ardell Heated Eyelash Curler is not lasting as long as it should, contact customer service for assistance.

Cant Get Ardell Heated Eyelash Curler to Turn on? 2

As a professional writer, I understand how frustrating it can be to struggle with a beauty tool that just won’t cooperate. The Ardell Heated Eyelash Curler is a popular choice for those who want perfectly curled lashes, but it can be tricky to figure out how to turn it on. If you find yourself in this situation, don’t worry – there are a few simple steps you can take to troubleshoot the problem.

First, make sure that you have inserted the battery correctly and that it is fully charged. If the battery is not properly inserted, the curler will not turn on. Additionally, if the battery is low or dead, the curler may not work even if it is properly inserted. Once you have confirmed that the battery is in the right place and fully charged, try pressing the power button for a few seconds. If the curler still does not turn on, check to make sure that the heating element is not damaged or dirty. With a little patience and persistence, you can get your Ardell Heated Eyelash Curler up and running in no time.

Michael Van Der Ham

Michael van der Ham is a Dutch fashion designer born in 1985 in Giessenburg. He graduated from Central Saint Martins in 2009 and has since established himself as a prominent womenswear designer. Michael has had the opportunity to design costumes for iconic musicians like Björk and Tori Amos, as well as for major events such as the 2012 Summer Olympics Opening Ceremony.

View all posts by Michael Van Der Ham →

Leave a Reply

Your email address will not be published. Required fields are marked *